The miniSMU MS01 comes with a dedicated desktop application that provides a comprehensive interface for controlling the device and performing various measurements. This section will guide you through the process of installing and setting up the software.

System Requirements

Before installing the miniSMU software, ensure your computer meets the following minimum system requirements:

• Operating System: Windows 10, or 11
• Processor: Dual-core CPU (1.8GHz or faster)
• Memory: 4GB RAM or greater
• Storage: 200 MB available disk space
• Connectivity:
  • USB 2.0 port for direct connection
  • WiFi adapter for wireless connection
  • Network connectivity (for on-network access)
    • TCP Port 3333 must be free to access miniSMU over a network

Downloading the Software

To obtain the miniSMU desktop application:

1. Contact Undalogic through an email request to receive the software installer.
2. Check your email for a download link and any accompanying instructions.
3. Download the installer to your computer.

Installation Process

Once you have downloaded the installer, follow these steps to install the miniSMU software:

1. Locate the downloaded installer file, typically named miniSMU controller-1.0.0 Setup.exe
2. Double-click the installer file to begin the installation process.
3. Wait for the installation to complete.
4. The miniSMU Application will launch automatically after installation.

First-Time Setup

After installing the miniSMU software, follow these steps to set it up for first use:

1. Connect your miniSMU MS01 to your computer using the provided USB-C cable.
2. Power on the miniSMU MS01 using the power switch on the rear panel.
3. Launch the miniSMU application from your Start menu or desktop shortcut.
4. The software should automatically detect your connected miniSMU MS01.

WiFi Configuration

To configure the miniSMU MS01 for WiFi connection:

1. Ensure the device is powered on and connected to your computer via USB.
2. In the miniSMU desktop application, connect to the miniSMU's COM port.
3. Click the gear icon in the connection window to access settings.
4. Click "WiFi Settings".
5. Click "Enable" under WiFi Radio.
6. Click "Scan WiFi Networks" to see available networks.
7. Select your WiFi network from the list and enter the password.
8. Upon successful connection, you can toggle the option to automatically connect to this WiFi network upon startup.

For more detailed information about using the miniSMU software for specific measurements and experiments, refer to the "Basic Operation" section of this documentation.